The drag force can be used to the electrodynamic system's advantage, however, as it creates a varying force in the rails that can be used as a reactionary system to drive the train, without the need for a separate reaction plate, as in most linear motor systems. Laithwaite led development of such "traverse-flux" systems at his Imperial College laboratory.  Alternatively, propulsion coils on the guideway are used to exert a force on the magnets in the train and make the train move forward. The propulsion coils that exert a force on the train are effectively a linear motor: an alternating current through the coils generates a continuously varying magnetic field that moves forward along the track. The frequency of the alternating current is synchronized to match the speed of the train. The offset between the field exerted by magnets on the train and the applied field creates a force moving the train forward.
CRN provides this database and data contained herein as a service to its members and for informational purposes only. CRN makes no representation or warranties, express or implied, as to the accuracy, reliability, and completeness of this database or data contained herein, and does not accept any liability with regard to such information. CRN also reserves the right to make changes or corrections to the information given without notice. This information does not constitute legal advice, nor is it a substitute for legal advice. Please consult professional legal counsel with any specific questions or for legal advice.